| Each A-16D Pro accepts one Pro16 A-Net input
signal and provides nine parallel outputs, using rugged EtherCon
connectors and standard Cat-5e cables. The A-16D Pro provides isolated
(floating ground) DC power through the eight A-Net Outs; the ninth
output is an unpowered A-Net Thru connector, designed for distributing a
copy of the A-Net signal to a second A-Net Distributor or remote
location. The 2U A-16D Pro eliminates the need to daisy chain Personal
Mixers, and simplifies set-up by eliminating the need to connect a power
supply to each mixer. Inside the A-16D Pro is Aviom's unique power
sub-system design, which requires no external power supplies and which
virtually eliminates the possibility of introducing hum or ground loops.
The A-16D Pro can also be used as a central hub in an audio distribution
system or snake, providing outputs to multiple locations or redundant
outputs to a single location.
All connections on the A-16D Pro are on the front panel. A
pass-through cable cutout is provided for flexible cable routing. As
with all Pro16 Series products, Cat-5e cable runs can be up to
500ft/150m. |
| A-Net Input |
One EtherCon RJ45 connector |
| A-Net Thru |
One EtherCon RJ45 connector, unpowered |
| A-Net Outputs |
8 EtherCon RJ45 connectors, powered (DC) |
| LEDs |
Power On; A-Net Active |
| Pro16 A-Net |
16 channels of digital audio over Cat-5e
cable |
| uses unshielded Cat-5e UTP (or better)
cable |
| Power Supply |
Internal, universal switching type |
| Input Voltage |
100-240VAC, 50-60Hz, 60W |
Output Voltage for
Personal Mixers |
18-24 VDC, 0.5 amp |
| transmitted over the Cat-5e cable |
| Dimensions |
19" (482.6 mm) wide x 14.25" (362 mm)
deep; 2U,
3.5" (88.9 mm) high |
| Weight |
12.0 lbs (5.44 kilo) |
|
