| The AN-16/i-M is a 3U-high rack-mounted mic- and
line-level input device with sixteen high-quality microphone preamps and
24-bit A-to-D converters. Each channel contains a three-segment level
meter, a continuously variable gain knob, a phase reverse switch,
48-volt phantom power, and a rumble filter with an 85Hz rolloff. In
addition, each pair of channels can be Stereo Linked for stereo
operation in a Pro16 Monitor Mixing System. The rear panel of the
AN-16/i-M contains a host of professional connectivity features. Each
channel has a combo jack that can accept either XLR mic or 1/4-inch
line-level (balanced or unbalanced) inputs. Sixteen passive mic Thru
connectors create a built-in microphone splitter. Balanced insert points
with separate 1/4-inch Send and Return jacks allow easy interfacing with
external processing devices. The sixteen insert Sends can also be used
as a set of post-gain direct audio outputs. The AN-16/i-M uses an
internal power supply with a standard IEC power connector.
Two parallel A-Net outputs allow the AN-16/i-M to send A-Net data to
multiple destinations, allowing for simultaneous patching to a monitor
console and a front-of-house console. Both A-Net outputs feature heavy
duty Neutrik EtherCon combo RJ45 connectors. The built-in A-Net
Expansion jack allows two 16-channel A-Net streams to be combined onto a
single cable (32x0 or 16x16), and the AN-16SBR System Bridge can be used
to combine up to four 16-channel streams onto a single cable in a
variety of bi-directional configurations.
As with all Pro16 Series products, Cat-5e cable runs of up to 500
feet (150 meters) are possible between devices. |
| Input: |
XLR, TRS; Combo Jack |
| Insert Send/ Return: |
Connector: TRS, Signal: Impedance
Balanced,
Nominal Level: 0 dBu |
| A-Net Output: |
one Category 5 (RJ45 connector)
|
| A-Net Expansion: |
one Category 5 (RJ45 connector) |
| Gain Range: |
Mic: +6dB to +60dB, variable |
| Line: -15dB to +36dB, variable |
| Input
Impedance: |
Mic: 2.4 ohms |
| Line (TRS): 33k ohms |
| Insert Return: 39k ohms |
| Low Cut Filter: |
-3dB @85Hz, -18dB per octave |
| Phantom Power: |
+48 volts, per channel |
| A/D Converters: |
24 bit |
| Digital
Outputs: |
A-Net: 2 (Main and Aux) |
| A-Net Expansion: 1 |
| Power Supply: |
Internal, universal switching
type; standard IEC cable provided |
| Voltage: |
100-240VAC, 50-60Hz, 60W |
| Dimensions: |
19" wide x 9.25" deep x 5.25"
high (3U) |
| Weight: |
12 lbs. |
|
